12 SPOKE All-Terrain OFF-ROAD Wheelchair Wheels 24 X 2 (PAIR) SENTINEL BRAND

Description

SENTINEL 12 SPOKE WHEELCHAIR WHEELS W/ KENDA NEVEGAL OFF-ROAD TIRES 24 X 2  (PAIR) (2)
BRAND NEW!   NEVER BEEN USED
FINALLY A 12 SPOKE OFF-ROAD WHEELCHAIR WHEEL AT AN AFFORDABLE PRICE.
The over-all height of this wheel and tire combination is 26 1/4".
Please allow 3 days processing time. The wheels are built to order. This process takes a little time.
12 Spoke Off-Road Wheelchair Wheels 24"x 2.1" (PAIR)
24 in. (540)  Sentinel Wheelchair Wheels w/ Fat Nevegal Tires Ove-Hight with the wheel installed is 26 1/4"
Great for outdoor sports enthusiasts or anyone needing added traction.
Works great for snow, sand, mud, and other rough terrains.
About this Set:
Great for off road, sand, sidewalks and even bumpy roads!
Low flange hub design with 2" hub width (measured from bearing to bearing)
Black aluminum 6 flat tab push rim with 2 hole adjustment
Included 1/2 precision bearings pre-installed
Sold as a complete pair and comes completely assembled ready to go
The 1/2" axle pins are not included
Spacers may be needed for some wheelchairs.
Wheel bearings work great as spacers
because they fit right on the axles.
The 24" Nevegal tires will roll like 25" to 26" wheels.
Kenda Nevegal tires provide incredible traction and shock absorption.
Wheel weight alone is  1.71 lbs
Fits most brands. Measure your current hub width.
(measured from bearing to bearing)
If your bearings are 2 inches apart, this wheelset will work on your wheelchair without any modifications.
Fits a variety of wheelchairs from Invacare (Top End), TiLite, Quickie, Colours, or any other brand needing a 24 inch or 540 mm size wheel. This wheelchair wheel fits wheelchairs using a 1/2 inch diameter axle bolt or 1/2 inch diameter quick release axle. To know if your existing axle will work, add the width of the hub (2") and add it to the length of your axle receiver tube* on the wheelchair and add approx 1/2" for the axle nut. If the axle is not long enough you will need to get a longer one. If you are using quick release axles, the length of the axle is measured from the underside of the adjustment nut to the start of the retractable ball. Most quick release axles have an adjustment up to a 1/4" for a snug fit.
* HOW TO MEASURE AXLE RECEIVER TUBE LENGTH
. To measure your receiver tube length, simply get a common carpentry nail that is at least 4" long. With the wheel removed from your wheelchair insert the nail, head first into the axle receiver tube until the nail head catches on the other side of the tube. Place a mark on the nail and remove. Measure the distance from the nail head to the mark to find the length of your axle receiver.